Surrey, BC

10657 135a St, Surrey, BC V3T 4E3.

Mail us on

[email protected]

Refrigerator Installation

During a refrigerator installation appointment, the technician is responsible for:

  • Ensuring the electrical cord is unplugged, if necessary to prevent damage to the electrical receptacle. 
  • De-pressurize main cold water system as required.
  • Provide labour & parts to install shut-off valve & fittings & up to 20′ of 1/4″ cold water supply line to meet all national, state & local plumbing codes. 
  • Pressurize main water supply & check all connections.
  • Purge air from the system as required.
  • double-check openings that are to be created to route cold water feed to ensure no damage occurs to other mechanical systems or visible surfaces.
  • Supply labor to install in-line water filter
  • Pressurize new cold water feed to rinse any contaminants out of line
  • Connect the tubing to refrigerator & pressurize the new cold water feed
  • Check all connections
  • Shutoff valve into main cold water supply line
  • 1/4″ tubing connection at new shut-off valve.
  • Packing nuts on all valves affected
  • 1/4″ tubing connection to refrigerator
  • Refrigerator’s plastic supply tube from solenoid to ice maker. 
  • Mechanical couplings on models through-door water dispenser
  • Ensure new tubing is secured to refrigerator to new shut-off valve & to surrounding house framing
  • Ensure cord is plugged back into receptacle, properly secured & refrierator is turned on
  • Re-locate refrigerator in opening & adjust for proper door swing if necessary
  • Activate ice maker by placing control arm in ready position
  • Activate through-door water dispenser by filling refrigerator reservoir & dispensing several cups of water


Click one of our contacts below to chat on WhatsApp

× How can I help you?